Quick Answer: Do Graphite Irons Go Further?

Do pros use graphite irons?

Over the past decade, graphite has become the material of choice on the PGA TOUR for shafts in drivers, fairway woods and hybrids, as pros have shifted away from steel and into lighter composites that increased swing speed and distance..

Should I switch to graphite shafts?

Players that do not have as much strength in their game should go with graphite shafts. For the golfer that has graphite in their irons, it is not a set rule that you must also have graphite in your wedges.

What is standard shaft length for irons?

Standard Length for Irons The same is true for graphite golf irons: the standard length for a 1 iron measures 40 inches, a 5 iron is 38 inches and a 9 iron is 36 inches. As is true for woods, the standard length measurement for women’s irons is 1 inch less for both steel and graphite irons.

Are graphite shafts good for high handicappers?

In general, most professionals and low handicappers prefer steel shafts, and beginner golfers and high handicappers benefit much more from graphite shafts. … Players, who swing too fast, also benefit as the heavier weight of steel-shafts, tend to reduce swing speeds and lead to a smoother and more consistent swing.

Why are graphite irons longer?

Graphite irons are longer because of swing weight. Let’s take, for instance, a brand new Callaway iron. A golf manufacturer is going to make a steel version and a graphite version of this club. They are going to want the specifications for both versions to match.

Do graphite shafts make a difference?

Graphite shafts are much lighter and more expensive in comparison to steel shafts, and weigh between 50 and 85 grams. As a result, the lightweight shafts on graphite irons can help to create a greater swing speed for more power.

How far does the average golfer hit a driver?

290-yardThe average PGA Tour player hits their driver a long way, typically in the 290-yard range.

Can you replace steel shafts with graphite?

Graphite iron shafts have traditionally been in the 55-85 gram range, especially for stock shafts in club manufacturer’s irons. … That changed a couple of years ago with Project X graphite and Aerotech Steelfiber iron shafts in the 95 gram range.

Are graphite shafts easier to hit?

Graphite shafts are generally much lighter than steel, which should make them easier to swing for those with slow swing speeds or that lack strength, like lady and senior golfers.

Do golf shafts go bad?

Simply put, as long as the graphite shaft is not cracked or peeling and the steel shafts are not kinked or badly pitted or rusted, a player’s golf clubs will last longer than a lifetime, though it is a commonly held misconception that the shaft will eventually wear out or suffer from fatigue to the point that it will …

How far should you hit a 7 iron?

140 yardsHow to Know Which Golf Club to UseClubMen’s Average DistanceWomen’s Average Distance6-iron150 yards130 yards7-iron140 yards120 yards8-iron130 yards110 yards9-iron120 yards100 yards9 more rows

Does Tiger Woods use steel or graphite shafts?

The winning clubs Tiger Woods has used for all five of his Masters titles. … Woods’ Masters career has also seen players go from drivers in the 260 cubic-centimeter range to 460 ccs, and in Woods’ case, the move from steel to graphite shafts in metalwoods.

Should I hit steel or graphite shafts?

There used to be a basic rule for iron shafts – if you’re a strong, competitive player you choose steel, and if you’re older, slower, a woman, or generally not athletic, you choose graphite. Steel shafts were always known as exceptionally consistent while graphite was unpredictable and overly light and flexible.

How far does the average golfer hit a 7 wood?

175-190 yardsHow far should you hit a 7-wood? swing speed will carry a golf ball with their 7-wood somewhere in between 175-190 yards. If you carry a 3-wood, a 5-wood, and a 7-wood, there should be a yardage gap between 10-15 yards with each club.

What is the best graphite shaft for irons?

5 Best Graphite Shafts for IronsKBS TGI 95. Raw Length: 39.0″ – 36.0″ Tip Size: .355 Taper. … Tour Shop Fresno Tour. Length: 35.5″ 39″ Tip Size: .355 Taper. … Graphite Design DI-6s. Length: 45.5″ Tip Size: .355 Taper. … AeroTech SteelFiber Set. Shaft Length: 36.5″ – 39.5″ Tip Size: .355 Taper. … AeroTech SteelFiber. Shaft Length: 36.5″ – 40″ Tip Size: .355 Taper.

Does Bryson use graphite shafts?

At the moment, DeChambeau is using 14 graphite-shafted clubs, making him the first to do so in a PGA Tour history. While the setup is unconventional, DeChambeau found the technology at LA Golf — his shaft outfitter — to be more stable and consistent than traditional steel.

Do graphite shafts increase distance?

Benefits of Graphite Shafts Graphite shafts are lighter than steel shafts, resulting in an increase in swing speed and distance. This is particularly beneficial to players with slow swing tempos. Most golfers can realize an increase of at least 5 yards for each club.

Do graphite golf shafts wear out?

Question: Do graphite shafts wear out, or does the flex change? Schnider: No, there is no fatigue factor. If you get something (a crack or fracture) inside the shaft (because of, say, airline travel), you will know it very quickly.

How far does Tiger Woods hit a 7-iron?

Club Averages According to Golf Digest, Tiger hits the driver an average of 285 yards with carry. His long irons (2- to 4-iron) range from 250 to 200 yards. His middle irons (5, 6, 7) range from 208 to 172 yards. His 8-iron travels 158 yards, and 9-iron flies 142.

How often should you change golf shafts?

2% replace them every 2 years. 17% change them every 3 years.